• Power Probe 3 PP319FTCRED hard-case kit, red
  • Power Probe 3 tester with controls and LCD display
  • Power Probe 3 kit contents — tester, cables, adapter, probe tip
  • Power Probe 3 in use diagnosing a 12V automotive circuit
  • 20 ft power-cable extension and cigarette-lighter adapter
1 5

Power Probe

Power Probe PP319FTC Circuit Tester with accessories

Power Probe PP319FTC Circuit Tester with accessories

£179.47
£179.47
Sale Sold out
UK Taxes included. Shipping calculated at checkout.
Color
Fast shippingDispatched in 24-48h
Pro warrantyBacked by Power Probe
Expert supportReal technicians
What it is

One probe. A full case of reach.

The Power Probe 3 is a handheld, all-in-one automotive circuit tester for diagnosing electrical faults on 12V and 24V DC systems — a digital voltmeter, polarity indicator, continuity tester, signal monitor and power/ground injector in one rugged body. This PP319FTCRED hard-case kit adds a 20 ft (6 m) power-cable extension and a cigarette-lighter adapter, so the tool reaches further around the vehicle and powers up from the 12V socket — all stored in a tough tool case.

Features & functions
  • Supply battery voltage or ground right at the probe tip to power motors, lamps, relays and solenoids — no back-probing the loom
  • Digital voltmeter (0–70V) with min/max capture and a backlit LCD reading to 0.1V
  • Red/green polarity LEDs and distinct audible tones confirm positive, negative and open circuits
  • Two built-in LED work lights illuminate the test area; bad-ground indicator flags poor earth connections
  • Two-level continuity testing (LCD <20kΩ, green LED <600Ω) plus audible signal monitoring
  • Hard-case kit adds a 20 ft (6 m) cable extension for double the reach and a cigarette-lighter adapter for 12V socket power
Resettable protection: an 8-amp thermal circuit breaker with a manual reset button guards against accidental shorts — reset and keep working, no blown fuses.
Technical specifications
Function Range / value
DC voltmeter range 0 to +70V DC + 1 digit
Working voltage 12V / 24V DC
Circuit breaker 8 A thermal, manual reset
Continuity to ground Display <20kΩ · green LED <600Ω
Power cable 20 ft (6 m) + 20 ft (6 m) extension
Probe tip 3 in (8 cm) stainless steel
What's in the box
1× Power Probe 3 tester · 1× 20 ft power cable with battery clips · 1× 20 ft power-cable extension · 1× 3 in stainless steel probe tip · 1× battery clip set · 1× cigarette-lighter adapter · 1× instruction manual · 1× hard tool case
Downloads
User manual (PDF) Datasheet (PDF)
Opens in a new tab
View full details